Solvent Weld White 40mm (43mm) Waste Pipe Swept Bend - Pack of 2

Product Information

Solvent weld a 43mm waste pipe to traps from the sink, shower, washer or more, to create secure wastage systems. This fitting has a physical pipe fitting size of 43mm and requires Solvent Weld Glue for installation.

At the moment this differs from the network of pallet couriers used so has to be resolved on a case by case basis. The PFL range of solvent weld fittings are made from PVC and provide a secure and permanent joint as the application of a solvent paste fuses the two plastic pieces together. On the other hand, solvent weld pipes necessitate the use of solvent cement, thereby establishing a strong and permanent seal. Pipe should come out of wall fairly easily, could use multifit joiner T28M inside to connect from old pipe to new 40mm pipe. I naively thought a simple replacement would be suitable however since found that the joint is solvent weld and has an outside diameter of 43mm rather the standard 40mm.Alternatively, the mechanical soil pipe boss connector provides a universal connection for push-fit pipes. Some postcodes are not available for pallet deliveries at this cost if this is the case we will contact you as soon as possible to either take additional payment to deliver the item or issue a refund. Our selection of air admittance valves from McAlpine includes a range of sizes and shapes for every type of plumbing system project.

Secondly, i just cannot find a standard 90 degree joint that has a suitable diameter of 43mm standard. This straight connect will receive pipe either end with a stop located in the middle, ensuring both pieces of pipe/fittings joint have the maximum amount of surface contact ensure for a superb watertight seal. I have noticed on a new bag of plumb bends that they are marked ABS 40mm, on the fittings in the bag 43mm (11/2) they are however listed as 32 and 40 and sold as such. Some confusing exists because some makes measure inside and some outside, and some vary slightly in size, for example the push fit stuff is smaller than the solvent weld. Be sure to make sure your pipe size is the same as that of your sink waste trap to avoid any nasty leaks.

However, this excludes damages caused by accidents, neglect or misuse of the Solvent Weld Waste Pipe 43mm Black. The metal parts of the valve are constructed from stainless steel, so they won't corrode with treatments and salt.