About this deal
When the car is cleaned and the surface holds water for more than one minute, this is a sign that Rapid Ceramic Spray should be reapplied. One area that, at the time of writing this, it hasn’t been applied to is the alloy wheels. These had UHD Wax applied to them the week before and I’d rather give the Rapid Ceramic Spray a fresh run on alloys that do not have any protection on them. Who is Rapid Ceramic Spray for?
Can Rapid Ceramic Spray be used on top UHD Wax, SRP and any of Autoglym’s other finishing products?Take a clean Hi-Tech Microfibre Finishing Cloth and buff to a high gloss before moving to another area of paintwork. Use additional cloths as required. Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3
data-src="https://cdn.media.amplience.net/i/washford/haluk-car-cleaning-spot1-step3-process-winter21-1382x867"No. Polishes contain abrasives, which will abrade the Rapid Ceramic Spray coating. A wax will perform better when applied to a well prepared surface. Therefore, while you can apply either over Rapid Ceramic Spray it is sub optimal. Shake well. Work on wet or dry painted surfaces in an area no larger than a shoulders width apart. For dry cars: Spray sparingly directly onto paintwork or onto a clean microfibre cloth or applicator and spread. For wet cars: Spray sparingly directly onto paintwork and spread with an Autoglym InstaDry. Two to three sprays per panel is sufficient, no more than two on smaller panels.
div>