Brasso Metal Polish Wadding, 75g

Product Information

Note: You’ll likely have to use more Brasso for tougher, dirtier spots! And if your Brasso cleaning cloth goes dry, add more liquid Brasso to it or use a new piece of wadding. Benefits of using Brasso Keep an eye out for a blue and white striped pot that has a big red label on the front, with the name ‘Brasso’ on it. Tip: If you’re using liquid Brasso, always pour the liquid from the can onto a clean cloth. Do not hold a cloth over the mouth of the can because this transfers dirt into the can. This then contaminates and weakens the Brasso inside the can. How to clean with wadding Brasso:

Using Brasso to clean and polish grotty metal surfaces is super easy, and doesn’t cost you a fortune! In addition to this, if you’ve used an appropriate amount of Brasso, and you’ve worked it into a surface and then buffed the surface again, you shouldn’t really have any excess Brasso left behind. So, you won’t need to ‘wipe Brasso off a surface’ per se. To use Brasso Metal Polish Wadding remove the wadding and apply evenly to the desired metal surface in small circular motionsBelow you’ll find steps on how to use Brasso in both liquid and wadding form. Skip to the section that applies to the Brasso you’ve bought. General tips to think about before you start using Brasso: For use on brass, copper, stainless steel and chrome, this product has been specially designed to provide excellent results and a longer lasting shine.

Regularly wipe/buff the already treated surface with a new clean cloth to see how you’re polishing exercise is going. Use small amounts of Brasso at a time, and add more product as you go– If you use too much Brasso you run the risk of it dripping everywhere as you use it, especially the liquid form, this is wasteful. Brasso Metal Polish Wadding has been in use for over a century - it has truly stood the test of time - and this product will continue to maintain the lustre of metal surfaces in the future. How To Use This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product

How Do You Use Brasso?

If you’ve got some stubborn Brasso that needs to be cleaned away, follow these steps to get rid of the troubling Brasso: For the historical county of the Kingdom of Hungary, see Brassó (county). For the county seat thereof, see Braşov. Although, if you’ve used an appropriate amount of Brasso for the surface you need to clean, and you’ve worked the Brasso into the item and buffed it as well, there shouldn’t be any need to remove the Brasso with water. Railway And Canal Commission." Times [London, England] 22 May 1913: 22. The Times Digital Archive. Web. 13 Sept. 2018.

Brasso is a well-known metal polisher, that can be used to polish, remove tarnish and clean up chrome, stainless steel, copper, and of course, brass. Brasso, if used correctly, will naturally be worked into a surface, and any residue will be buffed away by a clean cloth at the end of the exercise.When you’re done using your Brasso you need to store it away in a safe place, that is out of the reach of children and pets. If you wish to return this item to Robert Dyas, you can only do so by the following method: 1. Visit Your Local Robert Dyas Store Gently rub a piece of Brasso wadding onto the surface you want to clean to perform a small patch test – make sure the Brasso doesn’t mark or stain the surface you’re about to polish. Perform a small patch test to make sure the Brasso doesn’t mark or stain the surface you’re about to polish. These wadding pads have been impregnated with cleaning fluid meaning there is no need to get an extra cloth dirty.