Tommee Tippee Replacement Filter for the Perfect Prep Baby Bottle Maker Machines, Pack of 1

Product Information

Therefore, it’s extremely important that you make sure you’re buying and using the correct Tommee Tippee filters with your Perfect Prep machine. Press the start/stop button. A green light will flash, and water will be dispensed to finish the cycle. The contents should be discarded. High water temperature should only ever be an issue in hotter climates, but it is not uncommon for mains water to rise in temperature in cooler climates during a sustained period of hot weather. The Perfect Prep™ unit contains a probe that measures the temperature of the water in the tank which prevents the unit from dispensing if the water is above 27°C. This is a key safety feature to ensure that the final feed is not too hot for your baby. Long-Lasting: Each filter lasts up to 3 months*. Your Perfect Prep machine will notify you when the filter is due to be replaced

Anti-Bacterial Filter: The Perfect Prep anti-bacterial filter is designed for use with water straight from the tap and ensures that the water is clean and safe to make a bottle feed We would love for you to be able to prepare a smaller bottle volume with the Perfect Prep™ unit, but it cannot make up a bottle below 4oz because the volume of the feed needs to be large enough to easily split into two:This means that any volume below 100 ml may vary by +/- 5 ml, and any volume above 100 ml may vary by +/- 5%. Pop a container under the dispenser outlet to capture the water used to clean the system (ideally at least 1 litre capacity). The empty warning light should be off. The hot light should be on.

Using a cold-water sterilising solution (following manufacturer guidelines for using with 1.8 litres of water), add required amount to the water tank. Fill the tank to the max line with cold water and place a suitable container under the dispenser spout. Press the cleaning mode button for two seconds to empty the tank (ensure a suitably sized receptacle is under the dispenser outlet to collect the water). Then press the filter volume reset button for two seconds to clear the memory.This product is intended to filter potable (drinking) water only. Do not put water of unknown quality into this product. Always ensure good hygiene by washing your hands and work surfaces before handling the water filter. Before first use you need to run a cleaning cycle – which should take approximately 10 minutes. For hygiene and safety reasons you should clean your unit on a regular basis. As with any other method of making up a feed for a baby, it’s essential that good hygiene practices are observed when using and maintaining your Perfect Prep™ machine. A red change filter warning light will illuminate when the filter needs replacing soon (approx. 30 litres remaining). IF THIS LIGHT FLASHES, THE FILTER MUST BE CHANGED IMMEDIATELY.