Makita 199141-8 1.5m Guide Rail for SP6000

Product Information

The SP6000J2 saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (18mm) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 2mm to be performed before the entire material is cut through for clean and splinter-free cutting. 12 AMP Direct-Drive Power for Smooth Cutting The Makita DSP600 Twin 18v (36v) LXT Brushless 165mm (6-1/2”) Plunge Circular Saw delivers precise and more accurate cutting when combined with the Makita guide rail system (sold separately). The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful Makita-built brushless motor powered by two 18v LXT batteries with Automatic Torque Drive Technology (ADT) Technology, which adjusts cutting speed and torque during the cut for optimum performance.

AMP motor with variable speed control dial (2,000 - 5,200 RPM) for optimum performance in a variety of materials guide rail for use with Makita SP6000 / SP6000J1 / SP6000J2 Plunge Saw and the twin 18 volt cordless DSP600 Plunge Saw Makita DSP600ZJ Twin 18v LXT Brushless Cordless Plunge Saw 165mm Body Only In Makpac Type 4 Carry Case Multiple rails can be joined to one another using the 198885-7 (previously P-45777) guide rail joining bar (sold separately) The SP6000J2 has a powerful 12 AMP motor with soft start for smooth start-ups, and Electronic Speed Control to maintain a constant speed under load for smooth cutting. The variable speed dial control (2,000 – 5,200 RPM) allows the user to set the speed for optimum performance in a variety of materials. The built-in torque limiter helps prevent motor burnout, with an electric brake for added productivity. Precision Cuts and Ease of UseThis Makita E-05664 Protective Guide Rail Holder Bag is the perfect solution for keeping your guide rails safe and secure, as well as making them easier to transport. Precise straight and 45º bevel cuts as the position of the blade enters the material on the same sight line when using a guide rail (sold separately)

Precise bevel cutting as the position of the blade enters the material on the same cutting line whether cutting straight or bevelIdeal for cutting large wood panels, other wood materials including melamine and MDF, aluminum, and Corian® with optional, material specific blades Compatible guide rail system (sold separately) interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting

Slide lever on saw base designed to engage the optional guide rail (sold separately) when bevel cutting for stability metre Guide Rails (x2 + P-45777 single joining bar supplied) interact with the saw base to provide smooth, perfect, dead-on straight or bevel cuttingBuilt-in depth stop allows a preliminary first cut of 2 to 3mm to be performed prior to cutting through the entire material for clean and splinter-free cutting When used with a Makita Plunge Circular Saw (SP6000) - you have a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. Automatic Torque Drive Technology (ADT) automatically changes the cutting speed according to load conditions for optimum operation The Makita 199141-8 1.5m Guide Rail is primarily designed for use with the SP6000 Plunge Cut Saws. Multiple rails can be joined to one another using the 198885-7 guide rail connector (sold separately).