sourcing map 304 Stainless Steel Round Tubing 10mm OD 1mm Wall Thickness 250mm Length Seamless Straight Pipe Tube 2 Pcs

Product Information

Grade 304 and 316 stainless steel have a variety of properties making them ideally suited to a wide range of applications. Grade 304 is the most common stainless steel, offering great weldability, good forming properties and corrosion resistance. Our grade 304 tube is available in either bright or satin polished finishes.

This tubing is ultrahigh-purity, coaxial, chemically cleaned and passivated, and thermocouple-cleaned 316L stainless steel available in size: 1/8 to 2 in and 6 to 18 mm. The tube ends are prepared for orbital welding. 304/304L Welded Tubing Specifications Materials This tube at the point of manufacture goes through a process where the internal weld bead is rolled. The result is an improved internal finish along the weld, reducing the chance of a crevice where liquid or food product may be trapped. This assists with ‘clean in place’ (CIP) environment food and beverage process lines or other applications such as the pharmaceutical industry. Swagelok pre-insulated traced tubing bundles provide reliable process temperature maintenance in a variety of analytical and process instrumentation applications, including impulse lines, sample lines, and process lines and provide an economical choice compared to field tracing and insulating. The parallel configuration—process and tracer lines are parallel inside the bundle—allows all tubes to bend together in as little as an 8 in. (20.3 cm) radius in tubing sizes up to 3/4 in. or 12 mm, so the bundle is easier to route and connect in the field than cabled bundles. Specifications Materials This tube is typically destined for heat exchanger applications and is produced in a similar way to AWA product except that the internal bead is rolled flush with the inside tube surface prior to annealing.

A great range of stainless steel clips & brackets

The choice between seamless and welded stainless tube is dependent on the particular application and purpose of the end product. Each manufacturing method provides tubing with different beneficial characteristics. Seamless tubes tend to be more light weight with thinner walls, while welded tubes are heavier, more rigid and therefore typically straighter. Which industries utilise stainless steel tubes in their manufacture? We offer our range of stainless-steel tube (or pipe, pole, piping, tubing, as it is also often referred to as) in steel grades 304 and 316.

Stainless Steels are typically divided into five families (austenitic, martensitic, ferritic, precipitation hardening and duplex). Within these families over 250 different grades of stainless steel exist. The characteristics of a stainless pipe are determined by its relative family, grade and chemical composition. Where the chemical composition can be manipulated in such a way that desirable characteristics are reinforced depending on applicability. Factors that can be altered this way include mechanical, physical, thermal and anti-corrosive qualities. Metal Supplies™ supply metal tube products to locations throughout the UK and Europe. We are a leading provider of metal and metal services to both commercial and domestic customers, including a comprehensive range of stainless steel products. This tube is produced by the same process as AW tube but is annealed to relieve stresses and improve ductility. Bright annealing is carried out in a controlled-atmosphere furnace, so that no oxide or scale is formed on the surface.As deterioration due to weather is minimal stainless pipes are suited for both indoor and outdoor application.