Joined in 2023 
82 
63 About this deal
Age-specific settings or smart features: These are more nice-to-haves than necessities, but app syncing and custom fever alerts by age add some ease to your temperature-taking process.
This thermometer is intended for household use only. This product is not intended to diagnose any disease, but is a useful screening tool for temperature. Use of this thermometer is not intended as a substitute for consultation with your doctor. The operating ambient temperature range for this thermometer is 10 – 40 °C (50 – 104 °F). Do not expose the thermometer to temperature extremes (below -25 °C / -13 °F or over 55 °C / 131 °F) or excessive humidity (>95% RH). To avoid inaccurate measurements always use this thermometer with a new, clean Hygiene cap attached. Temperature elevation as indicated by Age Precision may signal a serious illness, especially in adults who are old, frail, have a weakened immune system, or neonates and infants. Please seek professional advice immediately when there is a temperature elevation and if you are taking temperature on:If you have toddlers or children who are averse to holding their breath, a forehead, ear or dual-mode device is likely a better fit. For the next measurement, press Eject button to remove and discard used lens filter, and put on a new, clean lens filter. For models without and eject button (ThermoScan® 3 and 4), pull off lens filter and discard. The thermometer comes with 21 disposable lens filters that are designed to be used with each measurement to prevent the spread of germs. The filters are easy to install and remove, and do not affect the accuracy of the readings. The Braun Thermoscan 6022 uses an infrared sensor to measure temperature. The thermometer is able to provide a reading in just one second and is accurate within ±0.2 °C. It is suitable for use on individuals of all ages, from newborns to adults, and is clinically tested and approved by medical professionals.
Infrared thermometers measure the heat your body emits, generally via the forehead or ear, by reading infrared light.These give results almost instantaneously and are more comfortable for young kids, though not recommended for newborns. (Readings from a rectal thermometer are more reliable, and with babies, reliable readings are key.) If the temperature reading is not within the typical range of human body temperature of 34 – 42.2 °C or 93.2–108 °F, make sure a new lens filter for cleaning is attached and that the thermometer is inserted correctly. Afterwards, take a new temperature reading. Verify that the ambient temperature is within the allowed operating range of 10 – 40 °C or 50 – 104 °F. If the thermometer is outside of this range, leave it in a room with a temperature within the specified range for 30 minutes before taking a measurement.To avoid inaccurate measurements ALWAYS use this thermometer with a new, clean lens filter attached. Attach a new lens filter by pushing the thermometer probe straight into the lens filter inside the box and then pulling out. neonates and infants under 3 months (consult your doctor immediately if the temperature exceeds 37.4 °C or 99.4 °F) Answer: The ThermoScan® 5 stores the last 9 temperature measurements. To display the stored measurement, the thermometer must be turned on. Press the Mem button. The display shows the temperature, and when releasing the Mem button, the stored temperature for that memory number is displayed, together with “M”. Each time the Mem button is pushed, the stored reading and an M is displayed to indicate each temperature measurement (e.g. M2). Memory mode is automatically exited by not pressing the memory button for 5 seconds.
Great Deal 
New Comment