Mixars 140101008 "Quattro-4ch" Pro Serato DJ Mixer

Product Information

Depending on whether you use Timecode Vinyl (Turntables) or Timecode CDs (CD Players) please perform the following steps: However, as mentioned in the Recording section, both Microphone Inputs can be recorded via the REC button of VirtualDJ via the dedicated recording input channel of the Audio interface. The effects sections of the Mixars Quattro is a mixed bag. The Quattro has a good selection of effects which includes four channel effects and 14 BPM-synced beat effects which are all post-fader, but overall they don’t sound as good as effects you’d find on Pioneer DJ mixers. The QUATTRO achieves the best layout, control, and reliability thanks to its 16 RGB pads, four effects (Filter, Noise, Gate, Crush) for each channel, FX section with 14 additional effects, send / return, and dedicated sampler volume. The dual USB ports lets hook up two laptops for easy changeover. The unit should be visible in the CONTROLLERS tab of Config and the “factory default” should be available/selected from the Mappings drop-down list. The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.

All forms of Ableton Live, Intro, Lite, Standard and Suite, can work with practically any instrument that sends out MIDI data, and it will be compatible with all versions of Live such as 9, 10 and 11. Due to this, the Quattro will be usable with Ableton Live.

Firmware & Drivers

With a one-to-one MIDI mapping, each control on your Quattro can only be assigned to a single parameter in Ableton Live. Limited Ableton parameter options to map to After successfully connecting the Mixars Quattro to Ableton live following the steps above, you can now MIDI map the physical knobs, pads, keys etc on the device to functionality within Ableton Live by doing the following:

All in all I like it, and I have used the Pioneers and the Behringer DDM4000 ( I only use mixers for radio). I now do not need a sperate controller for jingles nor for the effects. Use the Serato DJ Pro effects (choose A or B in your effects channels). Takes a little bit of getting used to if you have come off the Pioneer SP1 but you will get the hang of it. When you’re finished mapping, press the MIDI Map Mode button again to disable it. The Limitations of midi mapping the Quattro

Advanced Setup

Mixars probably went with a lower quality crossfader to cut down on cost and because many DJs looking to buy a four-channel mixer aren’t too concerned with scratching. However, Mixars does offer a higher quality crossfader called the Galileo Essential Crossfader Upgrade. This fader is the same as you would find in Mixars’ two-channel battle mixer which is built with scratch DJs in mind. Once installed, the Quattro performed as good as any scratch mixer. Software controls Currently, there isn’t a comparable product to the Mixars Quattro on the market. For Serato users who have been asking for a modern four-channel mixer with hardware controls for Serato DJ Pro, the Mixars Quattro delivers. It’s built solid, has all of the inputs and outputs a DJ could ask for and comes in at a great price.

The Mixars Quattro includes a range of features for spicing up your mixes. It allows you to add in your own hot cue points, samples, and play them whilst mixing to create a unique performance. It is also MIDI mappable, allowing you to use Serato DJ to map MIDI events to the available buttons on the mixer. The dual USB ports make DJ switch-overs a breeze, allowing you to keep both USBs plugged in at all times. There are 2 microphone inputs, allowing you to make announcements. The loop rotary control knob controls the loop and loop roll function in Serato DJ. By pressing it down you can activate a loop. By rotating it, you can change the size of the loop. The mixer also features line/phone outs for connecting up both cd/media players, as well as Serato timecode vinyls/turntables. The mixer also features a 5th fader for controlling the volume level of samples. Connect External Equipment Conclusion The Mixars Quattro is a solid four-channel mixer for those who want pro DJ features and functions in a recognisable club layout (ie Pioneer DJM mixers) without spending an arm and a leg. The Serato DJ enabled mixer features 4 high quality built-in effects. These effects can be easily added to any channel by the push of a button, and then you can use the channel's dedicated knob for controlling the amount. The 4 built-in effects are noise, filter, gate, and crush. The FX section also features 14 additional effects. Use these high quality effects to add texture and excitement to your build-ups and breakdowns during mixes. Versatile Mixer If you're looking to get the most out of your Quattro, our Ableton Midi Script Creator tool ' Control Surface Studio' is exactly what you need!

The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. Alternative Audio setups can be applied in the same window. The Mixars QUATTRO is a full-feature mixer made to conquer the club scene with superior audio quality completely integrated withthe world-renowned software, SERATO DJ.

Mixars Quattro offers 2 Microphone Inputs and Level/EQ controls from the top panel. Both audio signals from these inputs are directly routed to the Master Output of the unit. The Mixars Quattro is the ideal DJ mixer for professional and home applications. Whether you enjoy DJing in your bedroom, at parties, or playing out, the mixer provides all the essentials you need for creating a powerful and unique mix. Featuring both line/phono outs, and XLR and RCA master outputs, the mixer can be integrated into all setups. Its rugged metal construction ensures durability, whilst its functionality provides versatility, ideal for a DJ of any genre. Features VirtualDJ Pro Full can be used as a stand-alone software in case of emergency, but to truly unleash its power, you might want to connect it to some dedicated hardware. This mixer does come up short in a couple of areas. As a scratch DJ, I wish it came with a better crossfader, but after the Galileo Essential crossfader upgrade, I don’t have any crossfader complaints. The quality of the built-in effects isn’t on the same level as what you would find on Pioneer DJ mixers, but they aren’t terrible. Finally, I wish the Quattro had a way to switch from the full-kill isolator EQ mode to a classic EQ mode for more flexibility. The following hardware is not supported with Serato DJ when used with macOS 11 Big Sur (or by extension, Apple Silicon/M1 computers).Pioneer DJ have improved the already club standard features of the previous DJM900. The DJM-900NXS2 has 4 phono stages, 24 bit 96khz sound card and 2 USB ports for dual laptop use. It’s also got adjustable fader curves and an FX section evolved brilliantly from its predecessor. There is a further USB send/return to connect an iPad so you can can patch effect apps (such as RMX1000 for iOS) for full emulation of that unit. The DJM-900NXS2 works harmoniously with the CDJ2000NSX2 to make it the ultimate setup for those using Rekordbox. You can also use it in conjunction with Serato DJ Pro, Traktor, and ShowKontrol. Mixars's Quattro is a fantastically adaptable midi DJ controller that is extremely useful when coupled with Ableton Live. This device has a great range of features, making it ideal as an Ableton Live controller. If you wish to rather connect your turntables on channels 3 & 4 use the following configuration instead: