Honeywell XC100 Carbon Monoxide Alarm

Product Information

While carbon monoxide is odourless and obviously invisible, the Mercury 350.135 will not put you or your family members in danger by warning you about the harmful CO levels in no time with its loud alarm system. Insert the new battery (make sure it's the same type as the old one), starting with the negative end. Carbon monoxide (CO) is a silent killer. Exposure to this dangerous gas leads to a headache and even death in as fast as 10 minutes.

What to do with the expired carbon monoxide detector? Don't discard it along with your household garbage. Because a CO detector is electronic waste, it must be disposed of properly according to local laws and regulations. If the minimalistic design of this particular model doesn’t fancy you, the 7COC is optionally available with an additional digital display. The 30 ppm sensitivity of the detector makes it quite reliable in terms of critical response time. As for the concentration of the gas and their respective audio cues, the appliance will go off at 50 ppm, 100 ppm, and 300 pm, with alarm response times of 60-90, 10-40, and 3 minutes respectively.

Unlike older Honeywell detector models, the XC100 shows alarm messages if the high concentration of carbon monoxide has been detected. However, your unit won't stop chirping until you've resolved the issue that's causing it. Here are three ways to stop a Honeywell CO detector from chirping. Electronics failure. Two or three short chirps every minute (depending on the Honeywell model) means the device isn't working properly. Is your chirping CO detector keeping you up all night? A chirping Honeywell carbon monoxide detector can be silenced for 24 hours. Just press the Test/Hush button once. Pressing that button twice will reset the 24-hour period.

A Honeywell wireless smoke and carbon monoxide detector may chirp consistently due to one of these three reasons: The Honeywell XC100 is a small, lightweight alarm that features multiple high-sensitivity carbon monoxide detectors. However, their sensitivity is not the only thing that makes this model worthy of your attention. On the bright side, however, once the unit is properly mounted and turned on, it will detect any abrupt spikes of CO concentration in the air and notify you about them with a loud (85 dB) alarm noise. What makes it great, though, is that once you turn the sensor on, it doesn’t need further adjustments from your end. Test the detector by pressing the Test button. The alarm will go off, and the Status light will turn green. While the alarm system is certainly loud, the three LED lights located on the front panel will give you more information about the type of danger. The main green light indicates that the power is on, while the yellow and red ones are meant to indicate false and real alarms respectively. Thus, if the device glows red, you will know it is time to leave the premises immediately.Although carbon monoxide is not toxic, its reaction with haemoglobin surely is. Hence, if you have a gas stove, oven, electric dryers, boilers, or other potential smoke and carbon sources in your house, having a good gas detector is a must. Low battery. One short chirp every minute means your CO detector is low on battery and will soon be completely dead. The CO-9D is capable of distinguishing even the least harmful doses of carbon monoxide in your house, which is no small feat for a household CO detector. Furthermore, the built-in memory unit will come in handy if you need to determine the main sources of carbon monoxide in your house as it allows you to see at which times the gas concentration is the highest. Like other similar devices, the Kidde 10SCO features a Hush button that allows you to turn off the alarm when it has gone off accidentally. This will be helpful in case you plan on installing the smoke detector in your kitchen since, more often than not, some smoke occurs if you cook on a regular basis.

As for more quality-of-life improvements, the device features an additional end-of-life battery sensor that will notify you when the battery is running low on charge. That said, the included 9V battery isn’t exactly a long-lasting one, so if you need one that will last you for at least a year, we recommend purchasing one separately. Since the battery is sealed, there is no way to replace it once the original one runs out of charge. However, considering the total service lifespan of a single battery that nearly reaches 10 years straight, it doesn’t seem like that huge of an issue. Apart from that, the memory function allows recording the data gathered from CO sensors for up to 4 weeks straight, enabling you to see how the situation changes throughout the whole month. Moving on, the device also features a digital thermometer that will conveniently show the current temperature inside the room. Likewise, the appliance is small and highly portable, which allows utilising it in multiple rooms. Since CO is lighter than CO², this feature will prove to be quite useful in terms of determining potential gas leaks.

Honeywell XC100 Carbon Monoxide CO Detector

As soon as you start hearing your unit chirping, replace its battery with the same type. Ideally, the battery is changed every year. Battery replacement will reset your detector and make the chirping stop. Most carbon monoxide detectors come with a CO sensor as well as alarm and controlling components. While some of the models only signal users about dangerous levels of carbon monoxide, many devices can actually show you the numbers so you can see how bad the situation is. Mercury 350.135 CO detector is a seemingly simple device that hides more than your regular gas alarm underneath its plastic housing. Most Honeywell carbon monoxide detectors are built to last for seven years. Other Honeywell models (such as the XC100 and XC100D) can last for 10 years. You'll find the expiration date of your CO detector at the bottom part of the front panel. Beyond the date, you can't use the detector anymore and must replace it as soon as possible (refer to "How to install a new CO detector" above for the installation steps).

Fortunately, the Kidde 7COC covers all British gas requirements for household CO detectors while not being overpriced at the same time. The device doesn’t have too many buttons, which makes it fairly user-friendly. Data from the National Vital Statistics System show that in a span of five years (2010-2015), accidental carbon monoxide poisoning had killed 2,244 people in the US. That's a yearly average of 400 deaths. The number peaks in winter when people keep their windows closed and use heating systems.Non-stop chirping may also be a warning about a problem with your Honeywell carbon monoxide detector. It may not be as life-threatening as when the alarm goes off due to the presence of carbon monoxide, but you have to act on it immediately because it means your CO detector may stop functioning soon. And when it stops working, the consequences can be serious. On top of the regular visual indicators, the unit features an audible alarm system that will notify you and others in your house about potential threats. And with a beeping sound that reaches the noise level of 85 dB, the 10SCO certainly can be called a rather loud alarm system. So, you will definitely hear the alarm going off even if you are 20-30 metres away from the unit.