Burning Shield: The Jason Schechterle Story

Product Information

Grey areas? At the end of the day “who is inspecting/signing off the job?” is the real question and it is these people that need to be kept happy. If in doubt err on the side of belt n braces caution.. A wood-burning stove heat shield is a barrier that covers the wood-burning stove. It is installed in front of the appliance to protect a room’s wall, floor, and nearby furniture from the stove’s heat. As a rule, heat shields are made of metal or concrete and are covered with protective paint. Purpose of a Wood Burning Stove Heat Shield

Anvil costs for enchanted books are affected by level, rarity and the anvil use cost for the item. Rarity is a multiplier; 1 for common, 1 for uncommon, 2 for rare and 4 for very rare. For example, Advanced Protection IV would cost it's level times the rarity (very rare, 4) for 16 levels to put on an item. Every time an item is processed in the anvil, the next cost is increased by a factor of 2 Open and close the door on a cheap Chinese stove. Then open and close the door on a DG stove, Arada stoves, Woodford stoves, Hamlet stoves or Saltfire stoves. You’ll understand the difference. Replacing damaged walls, floors, and furniture takes time and money. The longer the damage stays, the more money you will spend replacing them. For example, you will have to pay for extra materials and labour to repair the damaged walls and floors. As already mentioned it is possible to shield a combustible material e.g.a wooden beam from the heat from a heat source.When installing a heat shield, make sure that it is mounted in a proper location. Otherwise, it will not be able to do its job. You will also risk your home’s surroundings being damaged. Conclusion Instead of spreading it outwards, heat shields are designed to reflect the stove’s heat towards the room. Such design helps keep the room warm and safe. It also reduces the risk of your home’s surroundings being affected by the heat. 2. Enhance the Stove’s Performance It’s worth following the rules and regulations when it comes to wood burning and multifuel stoves. If you have not used or owned a stove before you might not be aware quite how hot the stove and the flue pipe can get. In normal operation a flue pipe will be at 150 to 250 degrees centigrade but can go a lot higher. If deposits attached to the inside of a flue catch fire then a flue pipe can even glow red (worst case scenario and extremely rare). Building regulations must sensibly cover all eventualities (including a pipe glowing red hot) to protect property and life. The floor underneath a stove or in front of the glass can get much too hot to touch and a suitable hearth is imperative.

If you plan on installing a wood-burning stove in your home, you might have heard others encouraging you to install a heat shield as well. Is that a mandatory move? Why is it necessary? Let this article tell you more about the role of heat shields on wood-burning stoves. What Is a Wood Burning Stove Heat Shield? A company called Vlaze launched “aesthetically lovely” heat shields (see pic). VLAZE wall mounted heat shields are designed to be hung behind a wood burning stove creating a focal point that not only enhances the fireplace but allows the stove to be placed close to the wall behind. When installed the shield reduces the stoves distance to a combustible material by half and in the case of Charnwood appliances down to just 100mm. In the the second diagram (fig.2) the long orange arrow (distance from flue to wood) must be a minimum 15″ (5″ diameter flue) or 18″ (6″ diameter flue). The short red arrows show an area where the gap should be half of this (7.5″ or 9″). The gap between shield and combustible material must be 12mm minimum (BEST PRACTICE 25MM).TOP ADVICE: To make your job very easy just ensure there are no combustible materials anywhere near your stove. This distance can be halved if you shield the combustible material. The shield must, of course, be non-combustible (do not use plasterboard as it is not A1 fire-rated and may gradually crumble). Any combustible material must be three times “X” away from the flue pipe where X = the diameter of the flue pipe. Simple answer - not if you use basic common sense. Fire has been used as a heat source since man entered her first cave. It’s worth following the rules and regulations when it comes to wood burning and multifuel stoves. If you have not used or owned a stove before you might not be aware quite how hot the stove and the flue pipe can get. In normal operation a flue pipe will be at 150 to 250 degrees centigrade but can go a lot higher. If deposits attached to the inside of a flue catch fire then a flue pipe can even glow red (worst case scenario and extremely rare). Building regulations must sensibly cover all eventualities (including a pipe glowing red hot) to protect property and life. The floor underneath a stove or in front of the glass can get much too hot to touch and a suitable hearth is imperative. Note that some stoves can be fitted with a heat shield direct onto the stove (provided by the stove manufacturers). The DG Ivar 5 stove has a distance to combustibles at the rear of 400mm but fit their heat shield directly to the rear of their stove and this is reduced to 150mm. The Ekol Applepie also has an optional purpose built enclosure.