Dirty Down Rust Effect

Product Information

Rust paint is water soluble and the effects of painting will be lost by washing in water or by getting wet, but there may still be staining. To fill dents and grooves in surfaces, first cover the surface with paint, and then wipe the paint off the raised areas with a damp cloth (at an angle to the grooves), leaving some of the paint trapped.

This image also shows yellow rust dabbed onto a sheet of black plastic using a piece of kitchen roll. To fill dents and grooves in surfaces, first cover the surface with rust paint, and then wipe the paint off the raised areas with a damp cloth (at an angle to the grooves), leaving some of the paint trapped.Once everything had been sprayed within an inch of its life (there’s plenty more that I didn’t record! A little from an open pot isn’t going to do you much damage, but spraying aerosolised solvents around is a good way to put yourself in hospital! Thoroughly stir the mixture and ensure that solids on the bottom of the pot are fully mixed into the liquid. Very light shades can be obtained by dabbing a very small quantity when it has slightly dried, similar to the “dry brushing” technique. Allow rust paint to dry slightly on the brush for a very light effect, similar to the “dry brushing” painting technique.

Do not add water into the paint pot, it’s best tip a little paint into a separate pot and then add small amounts of water. About a week after I sprayed the Leman Russ I decided to go back and stick a little water on the door, just to see if it still reacted. Dirty Down is available from dealers throughout the United Kingdom including England, Northern Ireland and Scotland and dealers in other EU countries including Belgium, Czech Republic, Denmark, Eastonia, Finland, Germany, Hungary, Iceland, Netherlands, Norway, Poland, Spain, Sweden. Replace the lid quickly during use to prevent the liquid from evaporating or decant what you need to use for a job into a separate smaller pot/container with a lid.Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform.

Our paint is water soluble and the effects of painting will be lost by washing in water or handling with wet hands. I found the best way to do this was direct application and then use a brush loaded with water to wash it around.Following on from this post I’m planning on a follow-up where I look at how the Dirty Down Rust sits on top of various colours and finishes, how it reacts at different temperatures, and how easily it can be varnished. For a broken, patchy effect apply to small areas/patches at a time and allow to dry – more in some areas, less in others.