Creality Ender 3 Direct Drive Extruder Kit, Compatible for Creality Ender 3 Pro, Ender 3 V2, Full Assembled Hotend Kit Supports 1.75MM PLA, ABS TPU Filament

Product Information

One potential down side I'm aware of is that putting the extruder stepper and drive on the X carriage adds mass that the X drive motor has to both accelerate and decelerate; this could in theory have an effect on print quality, increasing ringing and overrun on the X axis (though this isn't generally a problem with the steppers used on the Ender 3 and similar printers). But we do have a direct drive conversion that is compatible with the CR-10S Pro/V2 here: https://www. Don't shell out a lot of money for the light stepper; anything with the right RPM and torque specs is perfectly fine, and 0. The 42-40 extruder is heavy so printing slower is a must because your X-axis 42-34 will be working double.

This direct drive upgrade kit is suitable for Creality Ender-3 V2, Ender-3 Pro, Ender-3, Voxelab Aquila 3D printers, NOT compatible with TITAN extruders. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive. The first stage, obviously, was removing the existing carriage and disconnecting all its cables from the motherboard. It is not possible for us to draw any conclusions about you, and any data collected as a result will never be passed on to third parties. Such an arrangement minimizes the travel distance of the filament to the hot end and can allow for more reliable 3D printing of flexible filaments.Direct extruding, Smooth feed-in: Equipped with quality motor, Lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament and malfunction when loading new filament. This Creality direct drive upgrade kit isn’t a completely integrated unit; it consists of the standard Ender 3 hot end and extruder, mounted on a new carriage. To swap carriages I just removed the belt tensioner, loosened the screws holding the print beam to its Z axis carriage and pulled the beam away from the upright far enough to slide the old one off and the new one on.

Comes with a 42-40 stepper motor，this direct extruder kit is made of aluminum alloy and plastic, durable, and wear resistant.One caution if you do get this and that is that it may take some time to tune the printer back to the way it was. The holes of the split type conversion bracket are perfectly aligned, with supports on both sides to keep the centre of gravity in the middle, this way the structure is more stable. This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone.