276°
Posted 20 hours ago

DYNAGEM polyWatch Watch Face Scratch Remover and Repair Polish

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Sometimes you will notice that the crystal will look better 24-48 hours after treatment, than immediately after application. That's because you've given the fresh melted plastic a chance to harden. old t-shirt .... moisten lightly with some finger's worth of water until it results in a "wet-spot" (insert dirty joke here) ... then a bit of the polish (fingernail sized drop) ... then I gently work the mustardy-paste into the wet spot until all the excess is in the fabric (about 2-3" across).

Polywatch alone does remove the tiny scratches and gives a nice overall finish, sort of like a coat of wax on a car finish.

The short answer is that yes, Polywatch works to remove scratches from watch crystals. Note, however, that this only applies to watch crystals made of plastic, hesalite, or acrylic. Polywatch will not work on sapphire or glass crystals as the abrasive material is not able to grind down the glass as it can with plastic. If you use Polywatch on glass crystals, it can instead cause scratches. How does PolyWatch work? I will sometimes, depending on the watch, use a coarse as 400 grit to start - all done by hand and you do need to be careful not to overdo it. It looks worse before it looks better: PolyWatch is a simple and reliable solution against scratches. The unique PolyWatch paste, which has proven itself millions of times, even removes deep scratches! It is not without reason that PolyWatch is the number 1 worldwide when it comes to watch polishes for acrylic glass. The innovative plastic deformation technology, which slightly softens the clear lacquer on the glass to fill in damaged spots, polishes away scratches and blemishes in an instant. Instructions You must remove all scratches at one grit, before moving to the next, and eventually you will get it clear: Usually I use masking tape around the bezel and edges to protect them. This is very important for gold-plated or filled watches as the chemicals tend to get underneath the plating and react with the base metal of the case.

I'm curious about Polywatch, or any single product for that matter for a full crystal polish. I assumed that to get a good polish (ranging from scratch elimination all the way to a high shine), you need to progressively decrease the Polywatch is so mild an abrasive I have never bothered to tape off anything and I just make sure to keep the cloth with the polish on it on the crystal alone and not rub the Polywatch on the remainder of the watch. What I do is use microsandpaper, starting with 1800 grit and working to 12,000 grit, this allows me to remove virtually all the scracthes, as a final step, I use Polywatch.

No - many are coated both sides. For removing outer AR coating I use diamond paste - fine so 0.5 or 1 micron will do the job with just dabbing a bit on the crystal and rubbing it with your finger.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment