Tamiya 58347 The Lunch Box CW-01 Electric Monster Truck RC Model Car Kit Re-Release

Product Information

Often called banana plugs, these are commonly found on charger adapter leads rather than batteries. Available in a range of diameters the larger sizes can support high current, but attention must be paid when connecting them to ensure they are the correct way round. If a battery has been included with the model, it is often selected by the manufacturer for a balance of performance, weight and production cost. Yet in ownership, many enthusiasts will want to buy batteries for their own financial needs. Several smaller capacity batteries are often cheaper, giving you the same combined runtime of a larger capacity battery whilst avoiding its much higher price and (often) additional weight. The obvious limit to fitting a battery in your model are the dimensions of the battery tray. Many models offer a clamp-style setup that can be shimmed,to increase its effective capacity. Some users do away with the battery tray altogether and employ velcro straps to secure the battery to the chassis. Also worth mentioning is the weight of the battery as fitting a larger, heavier battery (than that specified by the manufacturer) will alter the performance and handling characteristics of the model, shifting its centre of gravity. It is worth stating that I am not a physicist; This blog is not intended to educate electronic theory at a high level, but rather to offer a non-technical look at the basics. As such we cannot take responsibility for any untoward effects caused as a result of misunderstanding this post. If you have any questions, please drop our friendly engineers a message and if you spot any errors in this blog, please leave your comments below and we will update it with corrections. ESC: This is the connection between the radio system and the motor. You have several choices. The standard Tamiya unit is currently unavailable due to the chip shortage, so Tamiya are offering a choice of a Tamiya Hobbywing or Carson Dragster (Tamiya Germany) units. Where a model number is shown (e.g. 20 or 15) that is the motor capacity of the unit - the lower the number, the more powerful a motor you can install later. All work with the motor in the kit.

If you upgrade to a LiPo it does make it perform much better, I have to say I was really quite impressed with the performance improvement. And this is the sort of performance Tamiya should be providing straight out of the box.

How should I look after my batteries?

All Tamiya's use a rather crappy sealed 27T single "silver" can brushed motor. It's noisy and on NiMh massively under performs, even if this was 1990. Tamiya originally made the Lunch Box for only a few years in the late 1980's and early 1990's - incredibly since it's re-release in 2005, it has been on sale for almost twice as long, yet is still the most popular model by far in the range! THIS KIT INCLUDES UPGRADED 3300MAH BATTERY, FAST MAINS CHARGER, 15KG SUPER STRENGTH METAL GEARED SERVO AND UPGRADED BALL RACED BEARINGS! Turnigy Nano-Tech LiPo battery Lastly this Turnigy Nano-Tech battery with its label offers a lot of information. The 35-70c labelling suggests it can be discharged continuously up to 35C and for short surges up to 70C, offering a little more detail to the 'high discharge Li-Po battery' marking below. On the right we can see that the 3 cell option has been marked, denoting that it features a 3-cell 11.1 volt setup. This high-end battery would be ideal for a high-load RC car, such as our brushless converted Traxxas Defender. N.B. The bodyshell is white abs plastic as supplied so paint is needed to finish the model (a full decal sheet is included).

These tiny two pin connectors are found on batteries for micro drones and the HPI Q32 models. They are designed for use with low current chargers for example USB powered chargers. Again, care should be exercised when connecting these batteries as the small plugs can be forced together the wrong way round. Additional charge cable adapters are available to 'future proof' a smart charger against future plug innovations. Note that such cables are designed for charging only and are generally not intended to be used as a battery adapter for powering your car. How should I look after my batteries? The durable and easy-to-assemble 2WD chassis employs box type frame, front swing arm independent and rear rolling rigid suspension. Big 115mm diameter tyres offer dynamic running on even the toughest of surfaces. Sealed gearbox protects diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving. Please note: These ‘ready to run bundles’ includes everything you need to operate this model once the kit is built. This is a kit which will require building. This model comes with a white shell. Please see our Tamiya Paint range for colours available.

TOP CATEGORIES

Now that we have an understanding of some of the basics, we can select the right battery. On a simple level, this boils down to a few variables: cost, connector, compatibility and dimensions. anyhow, enjoy the build and have fun, seems some of the less experience want to put you off from the start, rc especially with your lad needs to be fun, if you and your lad are grinning, your winning, end of Alkaline : Not rechargeable. Commonly found in AA batteries and used in transmitters, TV remotes etc.

I recently bought a Turnigy SCT 2wd, these are cheap kits, cheaper than the LB, but they are easily 2 or 3 times better in every single way. These high current connectors are popular with drone pilots are simple to use and are keyed to avoid incorrect connection.Smart chargers will typically come with a selection of battery leads, balance boards and other accessories enabling them to be used with many different types of battery. If you intend to use LiPo batteries they are a no-brainer. Typically the higher-end smart chargers will be able to balance, discharge and storage charge batteries, essential functions for both caring and prolonging the life of your batteries. This popular Overlander charger has a maximum fast charge output of 7A with support for 6cell LiPo and 8cell NiMH batteries. In comparison this could easily charge a 3300mAh battery in less than an hour. Its worth noting that regularly 'fast' charging batteries at high voltages will shorten their life. Traxxas iD batteries are best charged with their EZ-Peak chargers such as the one above. This foolproof charger is designed to be used with the newer system with integrated balance cables, is compatible with both LiPo and NiMh cells and can safely charge at one button press. The first classic Tamiya model to join the X-SA series is the Lunch Box, favoured basher or many R/C fans and offering an all-around fun 2wd on those iconic bulging tires. LiPo : Lithium-ion polymer. Higher energy density, lighter weights, consistent powerful discharge, shorter lifespan (than NiMH) more volatile than other solutions and require intelligent chargers. Bearing Upgrade: These make the car run more smoothly and are easily installed during assembly. If there is no option for these shown, then the kit already includes the bearing upgrade as standard. These are entirely optional. Batteries can have cryptic markings on them, lets take a look at a couple of examples to decipher what they mean.